Hardwood Frames

Our custom made hardwood frames perfectly fit our Art2Life hardwood panels.

Two sizes available
12″ x 12″
18″ x 18″ NEW!

12″ x 12″ Frame specifications
Cradles are 1-3/4″ deep
Inner dimensions 12-1/16″ x 12-1/16″
Outer dimensions 12-11/16″ x 12-11/16″
Frames will accommodate panels thicknesses up to 1/4″
White poplar construction
Made in USA

18″ x 18″ Frame specifications
Cradles are 1-3/4″ deep
Inner dimensions 18-1/8″ x 18-1/8″
Outer dimensions 18-3/4″ x 18-3/4″
Frames will accommodate panels thicknesses up to 1/4″
White poplar construction
Made in USA

Shipping within the U.S. only
Frames are made from natural wood, so you can finish any way you like
Hanging hardware not included

Mounting Art2Life panels in frames

Mount the panels by placing a drop of white glue on each of the four corners on the back of your panel. If you’d like a more permanent joining of the panel to the frame, simply use more glue around the perimeter of the panel.

Lay the panel into the frame. Note that if you’re using Art2Life panels, there will be about 1/8″ reveal between the panel and frame, which is intentional.

You may want to have a small paintbrush, slightly damp with clean water, to get into the 1/8” reveal and clean-up any excess glue.

Then, lay a piece of clean paper or plastic over the artwork and weigh it down with some heavy books and let it dry for a few hours.